Columnar Carbon Monoxide Catalyst

Columnar 3mm Carbon Monoxide Reduction Catalyst

High Specific Surface Area
Chemical Synthesis
High Quality
Safe And Reliable
Product description: MINSTRONG Columnar 3mm Carbon Monoxide Reduction Catalyst can be used to treat high and low concentration carbon monoxide gas. It has the advantages of high specific surface area, high effective conte
INQUIRY

Product Introduction

Our Columnar 3mm Carbon Monoxide Reduction Catalyst can convert carbon monoxide into carbon dioxide at room temperature, preventing equipment and personnel from being damaged by carbon monoxide. The catalyst uses chemical synthesis to produce active ingredients, precisely controlling each process parameter of the synthesis reaction, using alumina as a binder, the active ingredient content is as high as 85%, and the powder does not contain binders, the active ingredient is as high as 99%. The catalyst does not contain activated carbon, can adapt to most working conditions, does not burn, has no volatility, is safe to use, and does not cause secondary pollution

Product Features

● The product has good strength, and the average crushing strength is greater than 45N/cm;
● The specific surface area is high, with a specific surface area as high as 180-240m²/g, and a large number of microporous structures are distributed inside the catalyst, which can effectively absorb carbon monoxide and carry out catalytic oxidation;
● The catalyst is resistant to high temperature, does not contain flammable and volatile components, and there is no risk of burning when dealing with high-concentration carbon monoxide, and will not produce secondary pollution;
● The active ingredient content is high, the active ingredient content of the catalyst is as high as 80%, the performance is stable, the life is long, and it is not easy to lose;
● The specific gravity of the catalyst is low, and the high specific surface area makes the specific gravity of the catalyst only 0.68g/cm³, and the weight of the catalyst required to process the same air volume will be reduced by 1/3;
● The raw materials and production process of the product are completely independent and controllable, and can be supplied stably for a long time.

Product Application

1.Purify carbon monoxide in refuge chambers, airtight compartments, and respirators to avoid carbon monoxide poisoning;
2.In the air separation system and compressor system, carbon monoxide is removed at room temperature;
3.removal of carbon monoxide from process gases;
4.Control carbon monoxide in flue gas to achieve up-to-standard emission of carbon monoxide

Product Parameters

Columnar 3mm Carbon Monoxide Reduction Catalyst Detail

Name	Columnar 3mm Carbon Monoxide Reduction Catalyst	Model	MINSLITE-A
Specification	Columnar	Brand	MINSTRONG
Active ingredient content	＞80%	Strength	＞45 N/cm
Specific surface area	180 - 240 m²/g	Bulk specific gravity	0.7（±0.05）g/ml
Note: Product specification parameters can be customized according to requirements.

Shipping and Packaging

The standard packaging is iron drum packaging (25 or 30kg, with a moisture-proof plastic bag inside), and it can be packaged according to the specified method.

Technical Support

● We can provide you with professional catalyst application consultation and design reasonable exhaust gas treatment solutions based on our high-performance catalysts;
● We can guide you in the design of process and equipment for free;
● We can provide you with the construction of test equipment, as well as the design, manufacture and installation of supporting catalytic reactors;
● We can provide you with on-site catalyst loading and commissioning guidance.

Questions you may care about

How do I determine the catalyst size and dosage?

According to your working conditions, we can select catalysts with appropriate specifications and calculate reasonable dosages.

How can I compare catalyst costs?

Catalysts are not consumable materials, and are generally calculated according to volume. It is necessary to calculate the comprehensive cost of catalysts based on important factors such as specific gravity, catalytic efficiency, and service life, and at the same time assess the technical and service capabilities of suppliers to prevent after-sales risks.

I don't know how to use the catalyst?

We will design a reasonable process flow according to your working conditions, and provide you with one-stop services such as catalyst selection, test plan formulation, device design and manufacture, and on-site commissioning.